How to select and size an vibration motor? Rotary vibrators or linear force vibration motor are widely used to initiate or restore the flow of stored bulk materials, and have proven to be effective in most situations. Industrial vibrators are available in many types and sizes. The key factors in using them effectively are to …
1. Heat the internal race of the new cylindrical roller bearing (5) and spacer (8) to between approx.80°C to 100°C (oil bath or hotplate) and push them onto the shaft up to the stop. 2. Allow the internal race and spacer to cool down so that they sit firmly on the shaft. 3. Clean the …
When replacing a bearing of vibration motor, we recommend to replace both bearings of a motor, even if only one bearing should be defective. A defective bearing will also always cause damage to the other bearing. The second bearing will fail after a short time. The bearing housings must also be replaced every 2nd time …
Requirements of the installation site. The connection part, to which the vibration motor is attached, must be: free from paint, corrosion, grease and oil, machined flat Install the vibration motor as follows: To install the vibration motors, a level vibration-resistant drive seat is required. In order to obtain a correct contact surface, this base must …
The vibration motors are supplied from the works with a 100 % centrifugal force setting as standard. If requested by the customer, the motors are supplied from the works with another setting of the centrifugal forces. The centrifugal forces can be set as follows to modify the output: Remove the protective hoods (1) from both …
How to Set the Centrifugal Force of the Vibration Motor? Read More »
When working on the vibration motor, these must be safely disconnected from the elec-trical mains. The procedure is as follows: 1. Switch off vibration motor.2. Secure against unintentional switching on.3. Determine that NEA and NEG are voltage-free.4. Earth and short-circuit.5. Cover and fence off neighboring live parts. The following maintenance work must be carried out …
The vibration motor are intended for installation in machines according to the equipment group and category. These machines use vibration motor for sieving, loosening, conveying, compacting and separating bulk materials. Any other use is considered improper. Qualification of the personnel: Assembly, commissioning, maintenance and trouble-shooting of the vibrators may only be performed by authorized qualified …
Upon delivery, the centrifugal weights are factory-adjusted to the maximum centrifugal force specified on the type plate. lf it is necessary to change this presetting centrifugal force generated by the vibration motor can be adjusted. In order to do so, the protective covers of the drive have to be removed on both sides. For A4x …
How to Adjust Centrifugal Force of Vibration Motor? Read More »
Operation of Vibrating Screen Clear away dust and stones from the base of the springs daily. Listen and notice the abnormal sound. If screen is not running normally (uneven strokes, broken springs, loose/missing bolts, cracked screen body, broken media, material built-up in vibrating equipment & hitting to structures, loss of V-belts tension, noisy bearings, bearing …