Linear vibration: that is, the projection of the vibration trajectory of the vibrating body on the horizontal plane and the vertical plane is a straight line vibration. To make the vibration motor vibrate in a straight line, the vibration motor manufacturer recommends that you install two types of vibration motors on the vibration machine body, and make the two shafts parallel to each other, but the motor turns, so that the two motors will run. Synchronized, the motor also vibrates linearly.
Circular or elliptical vibration: that is, the projection of the vibration trajectory of the vibration motor on the horizontal plane is a straight line, and the projection on the vertical plane is a vibration form of a circle or an ellipse. If you want the vibration motor to perform this kind of vibration, you only need to install a vibration motor on the vibration machine body.
Transportation Precautions for Vibration Motor
When handling the vibrating motor, the vibrating motor manufacturer recommends that everyone be careful not to damage or contaminate the motor, and pay attention to the safety of handling.
Since the vibration motor needs to be shipped in a wooden box, in order to avoid its damage or moisture, the vibration motor manufacturer recommends that you do not open the wooden box when it is not transported to the place, and pad it with wooden boards to avoid Moisture affects the performance of the vibration motor.
When transporting the vibration motor, in order to ensure its stability, the vibration motor manufacturer Fangli Electromechanical Equipment recommends that you use a rope to drag the center of gravity of the motor body to avoid damage.